Les Cyber-Mecha-kits du moment

Auteur Sujet: Falke 'Heavily Modified' WIP - Completed!!!!  (Lu 1560 fois)

Hors ligne tiking

  • Expert Cyberméchaniste
  • ****
  • Messages: 267
  • Remercié: 21 fois
Re : Falke 'Heavily Modified' WIP
« Réponse #20 le: 21 janvier 2019, 11:17:05 »
I decided to experiment with another artillery to give this craft a different look than the original gun that came with the kit. I managed to find an old WWII artillery gun in my 'Misc. Box'. So I devised a mount that will make it look the part. I call this, 'The Clunk Buster'. Just remember where you heard it first. ;)













 

Hors ligne tiking

  • Expert Cyberméchaniste
  • ****
  • Messages: 267
  • Remercié: 21 fois
Re : Falke 'Heavily Modified' WIP
« Réponse #21 le: 21 janvier 2019, 11:17:50 »
I added more details to the piece. Will add a couple more:





 

Hors ligne tiking

  • Expert Cyberméchaniste
  • ****
  • Messages: 267
  • Remercié: 21 fois
Re : Falke 'Heavily Modified' WIP
« Réponse #22 le: 21 janvier 2019, 11:18:34 »
Added several small details to make the artillery more intricate:



 

Hors ligne tiking

  • Expert Cyberméchaniste
  • ****
  • Messages: 267
  • Remercié: 21 fois
Re : Falke 'Heavily Modified' WIP
« Réponse #23 le: 21 janvier 2019, 11:19:09 »
The overall look of the parts added to the pod and rear engine so far. I am going to work on the rear engine to make it look a little more complex, but not too much. Although this is an advance craft, it is still has somewhat-modern, technical and mechanical parts.

 

Hors ligne tiking

  • Expert Cyberméchaniste
  • ****
  • Messages: 267
  • Remercié: 21 fois
Re : Falke 'Heavily Modified' WIP
« Réponse #24 le: 21 janvier 2019, 11:19:53 »
Now, more work done on the Falke. I decided that this build will only be a project for the Falke and therefore will be no diorama. This is simply because I want to start on my next project, which will involve another truck diorama(yeah, I know, no surprise...;) ). Also, because, I cannot seem to come up with a suitable diorama for it. I do have an idea of how it should be, but I just cannot get around putting it together. On top of that, I am not so inspired to do a sci-fi diorama. But maybe that will change in the near future. So, I will finish up this build and be done with it. 

Here we go:

I started to detail the engine. As you can see, it is 'OK' with just the original detailing, but it still needs more to give it more life:








---------------------------------------------------------------------------------


So, I started adding bits of plastic cards and parts from various kits, taken from my 'Misc. Box of tricks'. You can see how all the exra details add life to the simple engine:















 

Hors ligne tiking

  • Expert Cyberméchaniste
  • ****
  • Messages: 267
  • Remercié: 21 fois
Re : Falke 'Heavily Modified' WIP
« Réponse #25 le: 21 janvier 2019, 11:20:43 »
This is how it looks with some paint thrown on it( Not completely finished). It's not the best but, I wanted it to look a bit grimy, and worked-out, as this will be a hard worked Falke. ;)





 

Hors ligne Poseidon690

  • Titan cyberméchanoïde
  • ******
  • Messages: 1706
  • Remercié: 562 fois
Re : Falke 'Heavily Modified' WIP
« Réponse #26 le: 21 janvier 2019, 11:21:49 »
Hi,

Amazing WIP, love it too

Regards
Tittou - Mech'Albums
 

Hors ligne tiking

  • Expert Cyberméchaniste
  • ****
  • Messages: 267
  • Remercié: 21 fois
Re : Falke 'Heavily Modified' WIP
« Réponse #27 le: 21 janvier 2019, 11:22:33 »
More painting on some detail parts taken from my 'box of tricks':





 

Hors ligne tiking

  • Expert Cyberméchaniste
  • ****
  • Messages: 267
  • Remercié: 21 fois
Re : Falke 'Heavily Modified' WIP
« Réponse #28 le: 21 janvier 2019, 11:22:56 »

I managed to put some paint on my 'Clunk Buster' ( :lol:  Remind you of anything? ;) ) So it is all good to go!






This is what the finish build will look like. Well, I am hoping it will. As you can see, I have already painted the outter body of the Falke. It's a prilimary paint. So, it is not going to look like that. I wanted to see how the colors would look like but I was not exactly happy with the results. So, it is going to get make-over:


 

Hors ligne tiking

  • Expert Cyberméchaniste
  • ****
  • Messages: 267
  • Remercié: 21 fois
Re : Falke 'Heavily Modified' WIP
« Réponse #29 le: 21 janvier 2019, 11:23:38 »
OK. here we go again guys. We are nearly at completion of this build. Not much left to do. I still have weathering and more details to add, not much but you all know how it is. Once you start on the details, one cannot seem to stop. :) You just seem to want more. And you all know how much of a detail freak I am. :)

Anyways, I have now painted the entire model, at the least the pod section or cockpit section black. The Kit offers several camo schemes and black was one of them. So I opted for this color. Of course the scheme is slightly different than the kits but I had to deviate from it. You know. Never an original kit, when it comes to building a kit. :)

Below are small details I decided to add after the model was painted.  I used decals both from the kit and other plane kits I have in my 'box of tricks'







 

Hors ligne tiking

  • Expert Cyberméchaniste
  • ****
  • Messages: 267
  • Remercié: 21 fois
Re : Falke 'Heavily Modified' WIP
« Réponse #30 le: 21 janvier 2019, 11:24:14 »
Below is the painted pod without the engines mounted. The skull decal was a big issue. I had to slice the upper decal portion in sections to get the decal to fit and sit properly over the dome of the cockpit, properly. I was not 100% satisfied with the quality of the decals. Many got messed up or did not site right. :




 

Hors ligne tiking

  • Expert Cyberméchaniste
  • ****
  • Messages: 267
  • Remercié: 21 fois
Re : Falke 'Heavily Modified' WIP
« Réponse #31 le: 21 janvier 2019, 11:25:23 »
Below is the painted pod without the engines mounted. The skull decal was a big issue. I had to slice the upper decal portion in sections to get the decal to fit and sit properly over the dome of the cockpit, properly. I was not 100% satisfied with the quality of the decals. Many got messed up or did not site right. :




 

Hors ligne Poseidon690

  • Titan cyberméchanoïde
  • ******
  • Messages: 1706
  • Remercié: 562 fois
Re : Falke 'Heavily Modified' WIP
« Réponse #32 le: 21 janvier 2019, 11:26:49 »
Re,

The paintwork is also great ! Really good job
Tittou - Mech'Albums
 

Hors ligne Bouq'

  • Taulier
  • Paladin de Cyberméchanie
  • ******
  • Messages: 7870
  • Remercié: 1732 fois
  • Maladroit de la gauche et gauche de l'autre
    • Le blog de Cyber-Mecha
Re : Falke 'Heavily Modified' WIP - Completed!!!!
« Réponse #33 le: 22 février 2019, 16:06:14 »
les photos du kit terminé sont ici : http://www.cyber-mecha.com/index.php?topic=3146.0
le Samarien
Rigueur & bonne humeur
Rejoignez-nous sur Facebook : sur la Page ou dans le Groupe

- Remerciez les cyberméchanistes avec le bouton
- Localisez les cyberméchanistes proches de chez vous
 

Hors ligne tiking

  • Expert Cyberméchaniste
  • ****
  • Messages: 267
  • Remercié: 21 fois
Re : Re : Falke 'Heavily Modified' WIP
« Réponse #34 le: 27 février 2019, 21:18:15 »
Re,

The paintwork is also great ! Really good job

 :Merci: Although, I would have preferred another paint scheme, like the previous paint job before I painted it black. Oh well! Next time perhaps.
 

Hors ligne ben-grimm

  • Gradé
  • **
  • Messages: 70
  • Remercié: 6 fois
  • IT S CLOBERRING TO
Re : Falke 'Heavily Modified' WIP - Completed!!!!
« Réponse #35 le: 01 avril 2019, 21:12:49 »
J arrive après la bataille mais super boulot

 


Merci à nos partenaires !


Et pour le maquettisme mili, aéronautique... Visitez le forum partenaire